Model-specific reset guide
Epson ET-2702 Reset Waste Ink Counter
The service-required message on Epson ET-2702 often relates to the internal waste ink counter rather than an empty cartridge or paper fault. The steps below help you confirm and resolve that condition.
Why Epson ET-2702 stops printing
During head cleaning and normal maintenance, unused ink is directed into internal absorber pads. Epson ET-2702 estimates that accumulation with a software counter; it does not directly measure the physical amount of ink in the pads.
Wic Reset Connect is designed to reset the compatible counter in Epson ET-2702. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson ET-2702
Complete these steps in order. A direct USB connection and the original Epson driver are essential for reliable communication.
-
Install the original driver
Install the official Epson driver for ET-2702 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson ET-2702 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson ET-2702.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson ET-2702 is not detected
- Connect the printer directly to the computer. Do not use Wi-Fi, a USB hub, docking station or print server.
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
- Install the original Epson driver for ET-2702; a generic Windows driver may not expose the required communication interface.
Epson ET-2702 reset FAQ
Can I reset Epson ET-2702 over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
Does Epson ET-2702 need service mode?
No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.
What if the first reset attempt fails?
Correct the driver or USB communication problem first. If the key was consumed, use the new-key generator or contact support.
Restore Epson ET-2702
Ready to restore Epson ET-2702? Check the requirements once more and start the guided reset.