Epson XP-300 Waste Ink Counter Reset

The Epson XP-300 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson XP-300 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson XP-300 Show ‘Service Required’?

通常不需要上门服务。. Wic Reset Connect allows a safe Epson XP-300 waste counter reset in minutes.

Epson XP-300 Ink Pad Counter Reset – Quick Steps

1. 步骤 1： Use a Windows PC (7–11) with Internet access. Connect Epson XP-300 via USB (Wi-Fi reset is not supported).
2. 步骤 2： 开始 Wic Reset Connect in Administrator mode and wait until Epson XP-300 appears in the device list.
3. 步骤 3： Use the key to reset the counter, wait for completion, then restart Epson XP-300 to finalize.

Most Epson XP-300 waste counter resets finish in ~1–2 minutes.

开始之前

• 需要 USB 连接（不支持 Wi-Fi 重置）
• 有效 Wic 复位连接复位键
• Windows 7/8/10/11 电脑
• 重置期间稳定的互联网连接

如果检测不到打印机

• 以管理员身份运行应用程序。.
• 如果验证失败，则暂时禁用 VPN/代理。.
• 使用直接 USB 连接（避免使用集线器）。.
• 试试另一条 USB 电缆（有些电缆只能充电）。.
• 重新启动打印机和电脑，然后再试一次。.

常见问题