Epson XP-300 Waste Ink Counter Reset

The Epson XP-300 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson XP-300 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson XP-300 Show ‘Service Required’?

Kunjungan servis sering kali tidak diperlukan. Wic Reset Connect allows a safe Epson XP-300 waste counter reset in minutes.

Epson XP-300 Ink Pad Counter Reset – Quick Steps

1. Langkah 1: Use a Windows PC (7–11) with Internet access. Connect Epson XP-300 via USB (Wi-Fi reset is not supported).
2. Langkah 2: Mulai Wic Reset Connect in Administrator mode and wait until Epson XP-300 appears in the device list.
3. Langkah 3: Use the key to reset the counter, wait for completion, then restart Epson XP-300 to finalize.

Most Epson XP-300 waste counter resets finish in ~1–2 minutes.

Sebelum Anda Mulai

• Diperlukan koneksi USB (pengaturan ulang Wi-Fi tidak didukung)
• Tombol reset Wic Reset yang valid Hubungkan tombol reset
• Windows 7/8/10/11 PC
• Koneksi Internet stabil selama pengaturan ulang

Jika Printer Tidak Terdeteksi

• Jalankan aplikasi sebagai Administrator.
• Nonaktifkan VPN/proxy untuk sementara waktu jika validasi gagal.
• Gunakan koneksi USB langsung (hindari hub).
• Coba kabel USB yang lain (beberapa kabel hanya untuk mengisi daya).
• Hidupkan ulang printer dan PC, kemudian coba lagi.

Pertanyaan yang Sering Diajukan