Epson XP-300 Waste Ink Counter Reset

The Epson XP-300 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson XP-300 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson XP-300 Show ‘Service Required’?

A menudo no es necesaria una visita de servicio. Wic Reset Connect allows a safe Epson XP-300 waste counter reset in minutes.

Epson XP-300 Ink Pad Counter Reset – Quick Steps

1. Paso 1: Use a Windows PC (7–11) with Internet access. Connect Epson XP-300 via USB (Wi-Fi reset is not supported).
2. Paso 2: Inicio Wic Reset Connect in Administrator mode and wait until Epson XP-300 appears in the device list.
3. Paso 3: Use the key to reset the counter, wait for completion, then restart Epson XP-300 to finalize.

Most Epson XP-300 waste counter resets finish in ~1–2 minutes.

Antes de empezar

• Requiere conexión USB (no admite restablecimiento Wi-Fi)
• Válido Wic Reset Conectar tecla de reinicio
• Windows 7/8/10/11 PC
• Conexión a Internet estable durante el reinicio

Si no se detecta la impresora

• Ejecute la aplicación como Administrador.
• Desactivar temporalmente VPN/proxy si falla la validación.
• Utiliza una conexión USB directa (evita los concentradores).
• Prueba con otro cable USB (algunos cables son de carga).
• Reinicie la impresora y el PC y vuelva a intentarlo.

Preguntas frecuentes