Epson XP-301 Waste Ink Counter Reset

The Epson XP-301 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

A waste ink counter in the Epson XP-301 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why the Epson XP-301 Stops Printing (Waste Counter Limit)

通常不需要上门服务。. Wic Reset Connect allows a safe Epson XP-301 waste counter reset in minutes.

常见症状

• ‘驱动程序或实用程序中的 ’需要服务"/使用寿命信息
• 维护/支持代码（因型号/驱动程序而异）
• 清洁循环后停止打印
• 重新启动打印机后，警告重复出现

Three Steps to Restore Epson XP-301 Printing

1. 步骤 1： Prepare a Windows PC + USB cable and connect Epson XP-301 directly. Keep Internet enabled for validation.
2. 步骤 2： 开始 Wic Reset Connect in Administrator mode and wait until Epson XP-301 appears in the device list.
3. 步骤 3： Use the key to reset the counter, wait for completion, then restart Epson XP-301 to finalize.

Most Epson XP-301 waste counter resets finish in ~1–2 minutes.

开始之前

• 重置期间稳定的互联网连接
• 需要 USB 连接（不支持 Wi-Fi 重置）
• 有效 Wic 复位连接复位键
• Windows 7/8/10/11 电脑

故障排除

• 如果验证失败，则暂时禁用 VPN/代理。.
• 重新启动打印机和电脑，然后再试一次。.
• 试试另一条 USB 电缆（有些电缆只能充电）。.
• 使用直接 USB 连接（避免使用集线器）。.
• 关闭 Epson 状态监视器或其他打印机实用程序。.

常见问题