Model-specific reset guide
Đặt lại bộ đếm mực thải trên máy in Epson XP-300
The service-required message on Epson XP-300 often relates to the internal waste ink counter rather than an empty cartridge or paper fault. The steps below help you confirm and resolve that condition.
Before resetting Epson XP-300
The printer protects against possible ink overflow by monitoring an internal service counter. On Epson XP-300, reaching the threshold can trigger an ink pad warning and block further jobs.
Wic Reset Connect is designed to reset the compatible counter in Epson XP-300. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson XP-300
Complete these steps in order. A direct USB connection and the original Epson driver are essential for reliable communication.
-
Install the original driver
Install the official Epson driver for XP-300 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson XP-300 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson XP-300.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson XP-300 is not detected
- Install the original Epson driver for XP-300; a generic Windows driver may not expose the required communication interface.
- Connect the printer directly to the computer. Do not use Wi-Fi, a USB hub, docking station or print server.
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
- Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.
Epson XP-300 reset FAQ
Can I reset Epson XP-300 over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
What if the first reset attempt fails?
Correct the driver or USB communication problem first. If the key was consumed, use the new-key generator or contact support.
Does Epson XP-300 need service mode?
No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.
Restore Epson XP-300
Complete the Epson XP-300 counter reset with Wic Reset Connect and assistance whenever you need it.