Epson ET-2705 Waste Ink Counter Reset

If your Epson ET-2705 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson ET-2705 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson ET-2705 Waste Ink Counter

与 Wic Reset Connect, you can reset the Epson ET-2705 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

常见症状

• ‘驱动程序或实用程序中的 ’需要服务"/使用寿命信息
• 维护/支持代码（因型号/驱动程序而异）
• 清洁循环后停止打印
• 重新启动打印机后，警告重复出现

Three Steps to Restore Epson ET-2705 Printing

1. 步骤 1： Connect Epson ET-2705 to a Windows computer with a stable Internet connection using a USB cable.
2. 步骤 2： 开放 Wic Reset Connect with admin privileges and verify device recognition for Epson ET-2705.
3. 步骤 3： Use the key to reset the counter, wait for completion, then restart Epson ET-2705 to finalize.

Most Epson ET-2705 waste counter resets finish in ~1–2 minutes.

常见修复

• 试试另一条 USB 电缆（有些电缆只能充电）。.
• 使用直接 USB 连接（避免使用集线器）。.
• 重新启动打印机和电脑，然后再试一次。.
• 如果验证失败，则暂时禁用 VPN/代理。.
• 关闭 Epson 状态监视器或其他打印机实用程序。.