Epson ET-2705 Waste Ink Counter Reset

If your Epson ET-2705 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson ET-2705 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson ET-2705 Waste Ink Counter

S spletno stranjo Wic Reset Connect, you can reset the Epson ET-2705 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Pogosti simptomi

• ‘Sporočilo ’Service Required" / življenjska doba v gonilniku ali pripomočku
• Koda za vzdrževanje/podporo (razlikuje se glede na model/voznik)
• Tiskanje se ustavi po ciklih čiščenja
• Opozorilo se ponovi po ponovnem zagonu tiskalnika

Three Steps to Restore Epson ET-2705 Printing

1. 1. korak: Connect Epson ET-2705 to a Windows computer with a stable Internet connection using a USB cable.
2. 2. korak: Odpri Wic Reset Connect with admin privileges and verify device recognition for Epson ET-2705.
3. 3. korak: Use the key to reset the counter, wait for completion, then restart Epson ET-2705 to finalize.

Most Epson ET-2705 waste counter resets finish in ~1–2 minutes.

Pogosti popravki

• Poskusite z drugim kablom USB (nekateri kabli so namenjeni samo polnjenju).
• Uporabite neposredno povezavo USB (izogibajte se vozliščem).
• Ponovno zaženite tiskalnik in računalnik ter poskusite znova.
• Začasno onemogočite VPN/proxy, če preverjanje ni uspešno.
• Zaprite Epson Status Monitor ali druge pripomočke za tiskalnik.