特定型号重置指南
Epson ET-2706 重置废墨计数器
If your Epson ET-2706 has stopped with an ink pad or service-life warning, the printer may have reached its waste ink counter limit. This model-specific guide explains what the message means and how to complete the reset with Wic Reset Connect.
What the Epson ET-2706 service message means
Every cleaning cycle sends a small amount of ink to the waste ink system. Epson ET-2706 adds that activity to its counter and displays a maintenance warning when the programmed threshold is reached.
Wic Reset Connect 旨在重置兼容的计数器 Epson ET-2706. 。必要时仍应检查并维护实体废墨系统。.
Reset the counter in Epson ET-2706
重置通常只需几分钟，但在使用密钥之前，必须正确检测到打印机。.
-
安装原始驱动程序
Install the official Epson driver for ET-2706 and confirm that Windows can see the printer.
-
通过 USB 直接连接
Connect Epson ET-2706 to the computer without Wi-Fi, a hub or an adapter.
-
启动 Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson ET-2706.
-
输入密钥并重置
输入已购买的密钥，选择“重置”，并保持打印机连接状态，直到操作完成。.
If Epson ET-2706 is not detected
- 如果未检测到打印机，请尝试其他 USB 端口和已知支持数据传输的 USB 线缆。.
- 将打印机直接连接到计算机。不要使用 Wi-Fi、USB 集线器、扩展坞或打印服务器。.
- Install the original Epson driver for ET-2706; a generic Windows driver may not expose the required communication interface.
- 开始前，请关闭 Epson 状态监视器以及任何其他 Epson 维护软件，以便进行 Wic Reset Connect。.
Epson ET-2706 reset FAQ
如果第一次重置尝试失败怎么办？
请先解决驱动程序或 USB 通信问题。如果密钥已被使用，请使用新密钥生成器或联系支持人员。.
重置需要多长时间？
打印机被正确检测到后，重置本身通常会在约 1–2 分钟内完成。.
Does Epson ET-2706 need service mode?
不需要。Epson 打印机不使用 Canon 服务模式操作顺序。通过 USB 正常连接打印机即可。.