Model-specific reset guide
Epson ET-2705 – Återställning av räknaren för spillbläck
A waste ink counter warning can prevent Epson ET-2705 from printing even when the printer is otherwise working normally. Follow the checks and reset sequence below to restore operation safely.
Why Epson ET-2705 stops printing
Epson ET-2705 uses stored counter data to estimate absorber usage. The estimate may reach its limit before the pads appear completely saturated, but physical maintenance should still be considered.
Wic Reset Connect is designed to reset the compatible counter in Epson ET-2705. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson ET-2705
Use the sequence below to establish a stable USB connection and clear the waste ink counter.
-
Install the original driver
Install the official Epson driver for ET-2705 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson ET-2705 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson ET-2705.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson ET-2705 is not detected
- Try another USB port and a known data-capable USB cable if the printer is not detected.
- Install the original Epson driver for ET-2705; a generic Windows driver may not expose the required communication interface.
- Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.
- Connect the printer directly to the computer. Do not use Wi-Fi, a USB hub, docking station or print server.
Epson ET-2705 reset FAQ
Can I reset Epson ET-2705 over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
What if the first reset attempt fails?
Correct the driver or USB communication problem first. If the key was consumed, use the new-key generator or contact support.
How long does the reset take?
The reset itself usually finishes in about 1–2 minutes after the printer has been detected correctly.
Restore Epson ET-2705
Follow the verified sequence for Epson ET-2705, then restart the printer and continue your work.