Epson ET-2705 Waste Ink Counter Reset

If your Epson ET-2705 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson ET-2705 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson ET-2705 Waste Ink Counter

S Wic Reset Connect, you can reset the Epson ET-2705 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Uobičajeni simptomi

• ‘Potreban servis’ / poruka o vijeku trajanja u upravljačkom programu ili korisničkom sučelju
• Kôd za održavanje/podršku (razlikuje se ovisno o modelu/vozaču)
• Tiskanje se zaustavlja nakon ciklusa čišćenja
• Upozorenje se ponavlja nakon ponovnog pokretanja pisača

Three Steps to Restore Epson ET-2705 Printing

1. Korak 1: Connect Epson ET-2705 to a Windows computer with a stable Internet connection using a USB cable.
2. Korak 2: Otvoreno Wic Reset Connect with admin privileges and verify device recognition for Epson ET-2705.
3. Korak 3: Use the key to reset the counter, wait for completion, then restart Epson ET-2705 to finalize.

Most Epson ET-2705 waste counter resets finish in ~1–2 minutes.

Uobičajena rješenja

• Isprobajte drugi USB kabel (neki kabeli služe samo za punjenje).
• Koristite izravno USB-povezivanje (izbjegavajte USB-hubove).
• Ponovno pokrenite pisač i računalo, zatim pokušajte ponovno.
• Privremeno onemogućite VPN/proxy ako provjera ne uspije.
• Zatvorite Epson Status Monitor ili druge uslužne programe za pisač.