Epson XP-323 Waste Ink Counter Reset

When the Epson XP-323 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson XP-323 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson XP-323 Waste Ink Counter

Most Epson XP-323 waste ink counter locks are solved by a software counter reset. Wic Reset Connect ger en okomplicerad procedur.

Vanliga symtom

• ‘Service krävs’ / meddelande om livslängd i förare eller verktyg
• Kod för underhåll/support (varierar beroende på modell/förare)
• Utskriften stannar efter rengöringscykler
• Varningen upprepas efter omstart av skrivaren

Reset Epson XP-323 Waste Ink Counter in 3 Steps

1. Steg 1: Use a Windows PC (7–11) with Internet access. Connect Epson XP-323 via USB (Wi-Fi reset is not supported).
2. Steg 2: Öppna Wic Reset Connect with admin privileges and verify device recognition for Epson XP-323.
3. Steg 3: Use the key to reset the counter, wait for completion, then restart Epson XP-323 to finalize.

Most Epson XP-323 waste counter resets finish in ~1–2 minutes.

Innan du börjar

• USB-anslutning krävs (Wi-Fi-återställning stöds inte)
• Stabil internetanslutning under återställning
• Windows 7/8/10/11 PC
• Giltig Wic Reset Anslut återställningsknapp

VANLIGA FRÅGOR