Fix Epson XP-323 Service Required – Waste Counter Reset

Epson XP-323 Waste Ink Counter Reset

When the Epson XP-323 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson XP-323 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson XP-323 Waste Ink Counter

Most Epson XP-323 waste ink counter locks are solved by a software counter reset. Wic Reset Connect 提供了一个简单明了的程序。.

常见症状

‘驱动程序或实用程序中的 ’需要服务"/使用寿命信息
维护/支持代码（因型号/驱动程序而异）
清洁循环后停止打印
重新启动打印机后，警告重复出现

Reset Epson XP-323 Waste Ink Counter in 3 Steps

步骤 1： Use a Windows PC (7–11) with Internet access. Connect Epson XP-323 via USB (Wi-Fi reset is not supported).
步骤 2： 开放 Wic Reset Connect with admin privileges and verify device recognition for Epson XP-323.
步骤 3： Use the key to reset the counter, wait for completion, then restart Epson XP-323 to finalize.

购买重置密钥 ⬇️ 下载 Wic 重置连接说明

Most Epson XP-323 waste counter resets finish in ~1–2 minutes.

开始之前

需要 USB 连接（不支持 Wi-Fi 重置）
重置期间稳定的互联网连接
Windows 7/8/10/11 电脑
有效 Wic 复位连接复位键

常见问题

可以通过 Wi-Fi 重置吗？

重置需要通过 USB 连接到 Windows PC。.

需要多长时间？

通常约 1-2 分钟。.

我需要服务中心吗？

通常不用于废墨计数器锁；重置通常就足够了。.

如果重置不起作用怎么办？

检查 USB 电缆/端口，以管理员身份运行，并关闭其他打印机实用程序。.

Guide prepared for Epson XP-323 – Waste Ink Counter Reset using Wic Reset Connect.