Epson XP-323 Waste Ink Counter Reset

When the Epson XP-323 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson XP-323 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson XP-323 Waste Ink Counter

Most Epson XP-323 waste ink counter locks are solved by a software counter reset. Wic Reset Connect fornisce una procedura semplice.

Sintomi comuni

• ‘Messaggio ’Service Required' / service life nel driver o nell'utility
• Codice di manutenzione/assistenza (varia a seconda del modello/driver)
• La stampa si interrompe dopo i cicli di pulizia
• L'avviso si ripete dopo il riavvio della stampante

Reset Epson XP-323 Waste Ink Counter in 3 Steps

1. Fase 1: Use a Windows PC (7–11) with Internet access. Connect Epson XP-323 via USB (Wi-Fi reset is not supported).
2. Fase 2: Aperto Wic Reset Connect with admin privileges and verify device recognition for Epson XP-323.
3. Fase 3: Use the key to reset the counter, wait for completion, then restart Epson XP-323 to finalize.

Most Epson XP-323 waste counter resets finish in ~1–2 minutes.

Prima di iniziare

• È necessaria la connessione USB (il reset Wi-Fi non è supportato)
• Connessione Internet stabile durante il reset
• PC Windows 7/8/10/11
• Wic Reset valido Chiave di reset Connect

FAQ