Epson L3258 Waste Ink Counter Reset
If your Epson L3258 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.
During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson L3258 uses a software counter to estimate pad saturation and locks printing at a set threshold.
What Causes the Epson L3258 Ink Pad Counter Warning?
Ett servicebesök är ofta onödigt. Wic Reset Connect allows a safe Epson L3258 waste counter reset in minutes.
Vanliga symtom
- Skrivaren vägrar att skriva ut även om bläck finns tillgängligt
- Epson Status Monitor visar varning för underhåll
- Blinkande lampor och blockerade jobb
- Enheten är låst tills återställning har utförts
Reset Epson L3258 Waste Ink Counter in 3 Steps
- Steg 1: Use a Windows PC (7–11) with Internet access. Connect Epson L3258 via USB (Wi-Fi reset is not supported).
- Steg 2: Start Wic Reset Connect in Administrator mode and wait until Epson L3258 appears in the device list.
- Steg 3: Use the key to reset the counter, wait for completion, then restart Epson L3258 to finalize.
Most Epson L3258 waste counter resets finish in ~1–2 minutes.
Systemkrav
- USB-anslutning krävs (Wi-Fi-återställning stöds inte)
- Stabil internetanslutning under återställning
- Windows 7/8/10/11 PC
- Giltig Wic Reset Anslut återställningsknapp
Guide prepared for Epson L3258 – Waste Ink Counter Reset using Wic Reset Connect.