Epson L3258 Waste Ink Counter Reset
If your Epson L3258 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.
During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson L3258 uses a software counter to estimate pad saturation and locks printing at a set threshold.
What Causes the Epson L3258 Ink Pad Counter Warning?
Kunjungan servis sering kali tidak diperlukan. Wic Reset Connect allows a safe Epson L3258 waste counter reset in minutes.
Gejala Umum
- Printer menolak untuk mencetak meskipun tinta tersedia
- Monitor Status Epson menunjukkan peringatan pemeliharaan
- Lampu berkedip dan pekerjaan terhalang
- Perangkat terkunci hingga pengaturan ulang dilakukan
Reset Epson L3258 Waste Ink Counter in 3 Steps
- Langkah 1: Use a Windows PC (7–11) with Internet access. Connect Epson L3258 via USB (Wi-Fi reset is not supported).
- Langkah 2: Mulai Wic Reset Connect in Administrator mode and wait until Epson L3258 appears in the device list.
- Langkah 3: Use the key to reset the counter, wait for completion, then restart Epson L3258 to finalize.
Most Epson L3258 waste counter resets finish in ~1–2 minutes.
Persyaratan Sistem
- Diperlukan koneksi USB (pengaturan ulang Wi-Fi tidak didukung)
- Koneksi Internet stabil selama pengaturan ulang
- Windows 7/8/10/11 PC
- Tombol reset Wic Reset yang valid Hubungkan tombol reset
Guide prepared for Epson L3258 – Waste Ink Counter Reset using Wic Reset Connect.