Epson L3258 Waste Ink Counter Reset
If your Epson L3258 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.
During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson L3258 uses a software counter to estimate pad saturation and locks printing at a set threshold.
What Causes the Epson L3258 Ink Pad Counter Warning?
غالباً ما تكون زيارة الخدمة غير ضرورية. Wic Reset Connect allows a safe Epson L3258 waste counter reset in minutes.
الأعراض الشائعة
- ترفض الطابعة الطباعة حتى مع توفر الحبر
- تُظهر شاشة مراقبة حالة إبسون تحذير من الصيانة
- الأضواء الوامضة والوظائف المحجوبة
- الجهاز مغلق حتى تتم إعادة الضبط
Reset Epson L3258 Waste Ink Counter in 3 Steps
- الخطوة 1: Use a Windows PC (7–11) with Internet access. Connect Epson L3258 via USB (Wi-Fi reset is not supported).
- الخطوة 2: ابدأ Wic Reset Connect in Administrator mode and wait until Epson L3258 appears in the device list.
- الخطوة 3: Use the key to reset the counter, wait for completion, then restart Epson L3258 to finalize.
Most Epson L3258 waste counter resets finish in ~1–2 minutes.
متطلبات النظام
- يلزم الاتصال ب USB (إعادة تعيين Wi-Fi غير مدعوم)
- اتصال إنترنت مستقر أثناء إعادة التعيين
- نظام التشغيل ويندوز 7/8/10/11 الكمبيوتر الشخصي
- مفتاح إعادة تعيين مفتاح إعادة تعيين اتصال Wic صالح
Guide prepared for Epson L3258 – Waste Ink Counter Reset using Wic Reset Connect.