Epson L3258 Waste Ink Counter Reset
If your Epson L3258 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.
During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson L3258 uses a software counter to estimate pad saturation and locks printing at a set threshold.
What Causes the Epson L3258 Ink Pad Counter Warning?
O vizită de service este adesea inutilă. Wic Reset Connect allows a safe Epson L3258 waste counter reset in minutes.
Simptome comune
- Imprimanta refuză să imprime chiar dacă are cerneală disponibilă
- Epson Status Monitor afișează un avertisment de întreținere
- Lumini intermitente și lucrări blocate
- Dispozitivul este blocat până când se efectuează resetarea
Reset Epson L3258 Waste Ink Counter in 3 Steps
- Pasul 1: Use a Windows PC (7–11) with Internet access. Connect Epson L3258 via USB (Wi-Fi reset is not supported).
- Pasul 2: Start Wic Reset Connect in Administrator mode and wait until Epson L3258 appears in the device list.
- Pasul 3: Use the key to reset the counter, wait for completion, then restart Epson L3258 to finalize.
Most Epson L3258 waste counter resets finish in ~1–2 minutes.
Cerințe de sistem
- Conexiune USB necesară (resetarea Wi-Fi nu este acceptată)
- Conexiune stabilă la internet în timpul resetării
- Windows 7/8/10/11 PC
- Valid Wic Reset Conectați cheia de resetare
Guide prepared for Epson L3258 – Waste Ink Counter Reset using Wic Reset Connect.