Epson WF-2635 Waste Ink Counter Reset

The Epson WF-2635 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson WF-2635 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson WF-2635 Stops Printing (Waste Counter Limit)

Most Epson WF-2635 waste ink counter locks are solved by a software counter reset. Wic Reset Connect fornece um procedimento simples.

Reset Epson WF-2635 Waste Ink Counter in 3 Steps

1. Passo 1: Use a Windows PC (7–11) with Internet access. Connect Epson WF-2635 via USB (Wi-Fi reset is not supported).
2. Passo 2: Correr Wic Reset Connect as Administrator and confirm Epson WF-2635 is detected.
3. Etapa 3: Use the key to reset the counter, wait for completion, then restart Epson WF-2635 to finalize.

Most Epson WF-2635 waste counter resets finish in ~1–2 minutes.

O que é necessário

• É necessária uma ligação USB (a reposição Wi-Fi não é suportada)
• Ligação estável à Internet durante a reinicialização
• Windows 7/8/10/11 PC
• Valid Wic Reset Ligar a chave de reinicialização

Resolução de problemas

• Feche o Epson Status Monitor ou outros utilitários da impressora.
• Desativar temporariamente a VPN/proxy se a validação falhar.
• Utilize uma ligação USB direta (evite hubs).
• Executar a aplicação como Administrador.
• Experimente outro cabo USB (alguns cabos são apenas de carregamento).