Epson WF-2635 Waste Ink Counter Reset

The Epson WF-2635 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson WF-2635 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson WF-2635 Stops Printing (Waste Counter Limit)

Most Epson WF-2635 waste ink counter locks are solved by a software counter reset. Wic Reset Connect ofrece un procedimiento sencillo.

Reset Epson WF-2635 Waste Ink Counter in 3 Steps

1. Paso 1: Use a Windows PC (7–11) with Internet access. Connect Epson WF-2635 via USB (Wi-Fi reset is not supported).
2. Paso 2: Ejecutar Wic Reset Connect as Administrator and confirm Epson WF-2635 is detected.
3. Paso 3: Use the key to reset the counter, wait for completion, then restart Epson WF-2635 to finalize.

Most Epson WF-2635 waste counter resets finish in ~1–2 minutes.

Lo que necesita

• Requiere conexión USB (no admite restablecimiento Wi-Fi)
• Conexión a Internet estable durante el reinicio
• Windows 7/8/10/11 PC
• Válido Wic Reset Conectar tecla de reinicio

Solución de problemas

• Cierre Epson Status Monitor u otras utilidades de la impresora.
• Desactivar temporalmente VPN/proxy si falla la validación.
• Utiliza una conexión USB directa (evita los concentradores).
• Ejecute la aplicación como Administrador.
• Prueba con otro cable USB (algunos cables son de carga).