Epson WF-2635 Waste Ink Counter Reset

The Epson WF-2635 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson WF-2635 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson WF-2635 Stops Printing (Waste Counter Limit)

Most Epson WF-2635 waste ink counter locks are solved by a software counter reset. Wic Reset Connect omogoča enostaven postopek.

Reset Epson WF-2635 Waste Ink Counter in 3 Steps

1. 1. korak: Use a Windows PC (7–11) with Internet access. Connect Epson WF-2635 via USB (Wi-Fi reset is not supported).
2. 2. korak: Spustite Wic Reset Connect as Administrator and confirm Epson WF-2635 is detected.
3. 3. korak: Use the key to reset the counter, wait for completion, then restart Epson WF-2635 to finalize.

Most Epson WF-2635 waste counter resets finish in ~1–2 minutes.

Kaj potrebujete

• Zahtevana je povezava USB (ponastavitev Wi-Fi ni podprta)
• Stabilna internetna povezava med ponastavitvijo
• Windows 7/8/10/11 PC
• Veljavna ponastavitev Wic Povežite tipko za ponastavitev

Odpravljanje težav

• Zaprite Epson Status Monitor ali druge pripomočke za tiskalnik.
• Začasno onemogočite VPN/proxy, če preverjanje ni uspešno.
• Uporabite neposredno povezavo USB (izogibajte se vozliščem).
• Aplikacijo zaženite kot skrbnik.
• Poskusite z drugim kablom USB (nekateri kabli so namenjeni samo polnjenju).