Epson XP-217 Waste Ink Counter Reset

When the Epson XP-217 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson XP-217 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson XP-217 Waste Ink Counter

サービス訪問は不要な場合が多い。. Wic Reset Connect allows a safe Epson XP-217 waste counter reset in minutes.

Reset Epson XP-217 Waste Ink Counter in 3 Steps

1. ステップ1： Use a Windows PC (7–11) with Internet access. Connect Epson XP-217 via USB (Wi-Fi reset is not supported).
2. ステップ2： スタート Wic Reset Connect in Administrator mode and wait until Epson XP-217 appears in the device list.
3. ステップ3： リセットキーを貼り付け リセット, and after completion power-cycle Epson XP-217.

Most Epson XP-217 waste counter resets finish in ~1–2 minutes.

始める前に

• リセット中の安定したインターネット接続
• 有効なWicリセット コネクトリセットキー
• Windows 7/8/10/11 PC
• USB接続が必要（Wi-Fiリセットには非対応）