特定型号重置指南
爱普生 XP-217 重置废墨计数器
Epson XP-217 may refuse new print jobs after estimating that the waste ink pads have reached their service limit. Wic Reset Connect can reset the software counter after the printer is prepared correctly.
Why the ink pad counter blocks Epson XP-217
Waste ink produced by cleaning cycles is collected inside the printer. Epson XP-217 tracks those cycles electronically and can stop printing when the calculated limit is reached.
Wic Reset Connect 旨在重置兼容的计数器 Epson XP-217. 。必要时仍应检查并维护实体废墨系统。.
Reset the counter in Epson XP-217
正确的准备工作可以避免在通信失败时使用重置密钥。选择“重置”前，请确认每项要求。.
-
安装原始驱动程序
Install the official Epson driver for XP-217 and confirm that Windows can see the printer.
-
通过 USB 直接连接
Connect Epson XP-217 to the computer without Wi-Fi, a hub or an adapter.
-
启动 Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson XP-217.
-
输入密钥并重置
输入已购买的密钥，选择“重置”，并保持打印机连接状态，直到操作完成。.
If Epson XP-217 is not detected
- 开始前，请关闭 Epson 状态监视器以及任何其他 Epson 维护软件，以便进行 Wic Reset Connect。.
- 清除暂停的打印任务；如果其他程序占用了 USB 连接，请同时重新启动打印机和 Windows。.
- 将打印机直接连接到计算机。不要使用 Wi-Fi、USB 集线器、扩展坞或打印服务器。.
- Install the original Epson driver for XP-217; a generic Windows driver may not expose the required communication interface.
Epson XP-217 reset FAQ
重置需要多长时间？
打印机被正确检测到后，重置本身通常会在约 1–2 分钟内完成。.
Does Epson XP-217 need service mode?
不需要。Epson 打印机不使用 Canon 服务模式操作顺序。通过 USB 正常连接打印机即可。.
Can I reset Epson XP-217 over Wi-Fi?
不能。Wic Reset Connect 需要通过 USB 直接连接到 Windows 计算机。.