Epson XP-217 Waste Ink Counter Reset

When the Epson XP-217 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson XP-217 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson XP-217 Waste Ink Counter

Et servicebesøg er ofte unødvendigt. Wic Reset Connect allows a safe Epson XP-217 waste counter reset in minutes.

Reset Epson XP-217 Waste Ink Counter in 3 Steps

1. Trin 1: Use a Windows PC (7–11) with Internet access. Connect Epson XP-217 via USB (Wi-Fi reset is not supported).
2. Trin 2: Start Wic Reset Connect in Administrator mode and wait until Epson XP-217 appears in the device list.
3. Trin 3: Indsæt nulstillingsnøglen, klik på Nulstil, and after completion power-cycle Epson XP-217.

Most Epson XP-217 waste counter resets finish in ~1–2 minutes.

Før du begynder

• Stabil internetforbindelse under nulstilling
• Gyldig Wic-nulstilling Tilslut nulstillingsnøgle
• Windows 7/8/10/11 PC
• USB-forbindelse påkrævet (Wi-Fi-nulstilling understøttes ikke)