Epson Photo 1500W Waste Ink Counter Reset

When the Epson Photo 1500W reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson Photo 1500W uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson Photo 1500W Waste Ink Counter

Dengan Wic Reset Connect, you can reset the Epson Photo 1500W waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Gejala Umum

• Printer menolak untuk mencetak meskipun tinta tersedia
• Monitor Status Epson menunjukkan peringatan pemeliharaan
• Lampu berkedip dan pekerjaan terhalang
• Perangkat terkunci hingga pengaturan ulang dilakukan

Reset Epson Photo 1500W Waste Ink Counter in 3 Steps

1. Langkah 1: Use a Windows PC (7–11) with Internet access. Connect Epson Photo 1500W via USB (Wi-Fi reset is not supported).
2. Langkah 2: Mulai Wic Reset Connect in Administrator mode and wait until Epson Photo 1500W appears in the device list.
3. Langkah 3: Use the key to reset the counter, wait for completion, then restart Epson Photo 1500W to finalize.

Most Epson Photo 1500W waste counter resets finish in ~1–2 minutes.

Apa yang Anda Butuhkan

• Windows 7/8/10/11 PC
• Tombol reset Wic Reset yang valid Hubungkan tombol reset
• Koneksi Internet stabil selama pengaturan ulang
• Diperlukan koneksi USB (pengaturan ulang Wi-Fi tidak didukung)

Pemecahan masalah

• Jalankan aplikasi sebagai Administrator.
• Tutup Epson Status Monitor atau utilitas printer lainnya.
• Coba kabel USB yang lain (beberapa kabel hanya untuk mengisi daya).
• Gunakan koneksi USB langsung (hindari hub).
• Hidupkan ulang printer dan PC, kemudian coba lagi.