Epson Photo 1500W Waste Ink Counter Reset

When the Epson Photo 1500W reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson Photo 1500W uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson Photo 1500W Waste Ink Counter

Med Wic Reset Connect, you can reset the Epson Photo 1500W waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Almindelige symptomer

• Printeren nægter at udskrive, selv om der er blæk til rådighed
• Epson Status Monitor viser advarsel om vedligeholdelse
• Blinkende lys og blokerede jobs
• Enheden er låst, indtil nulstilling er udført

Reset Epson Photo 1500W Waste Ink Counter in 3 Steps

1. Trin 1: Use a Windows PC (7–11) with Internet access. Connect Epson Photo 1500W via USB (Wi-Fi reset is not supported).
2. Trin 2: Start Wic Reset Connect in Administrator mode and wait until Epson Photo 1500W appears in the device list.
3. Trin 3: Use the key to reset the counter, wait for completion, then restart Epson Photo 1500W to finalize.

Most Epson Photo 1500W waste counter resets finish in ~1–2 minutes.

Hvad du har brug for

• Windows 7/8/10/11 PC
• Gyldig Wic-nulstilling Tilslut nulstillingsnøgle
• Stabil internetforbindelse under nulstilling
• USB-forbindelse påkrævet (Wi-Fi-nulstilling understøttes ikke)

Fejlfinding

• Kør appen som administrator.
• Luk Epson Status Monitor eller andre printerværktøjer.
• Prøv et andet USB-kabel (nogle kabler er kun til opladning).
• Brug en direkte USB-forbindelse (undgå hubs).
• Genstart printeren og pc'en, og prøv igen.