Panduan reset khusus model

Epson Photo 1430 Reset Waste Ink Counter

A waste ink counter warning can prevent Epson Photo 1430 from printing even when the printer is otherwise working normally. Follow the checks and reset sequence below to restore operation safely.

Kunci reset$8,00
Pengiriman email instanTermasuk dukungan teknisKunci pengganti setelah reset gagal
Masalahnya

Why the ink pad counter blocks Epson Photo 1430

During head cleaning and normal maintenance, unused ink is directed into internal absorber pads. Epson Photo 1430 estimates that accumulation with a software counter; it does not directly measure the physical amount of ink in the pads.

Wic Reset Connect dirancang untuk mereset penghitung yang kompatibel pada Epson Photo 1430. Sistem tinta buangan fisik tetap harus diperiksa dan dirawat bila diperlukan.

Windows 7–11PC atau laptop
USB langsungTanpa Wi-Fi atau hub
InternetUntuk validasi kunci
Kunci resetUntuk operasi ini
Langkah demi langkah

Reset the counter in Epson Photo 1430

Siapkan komputer dan koneksi terlebih dahulu. Sebagian besar upaya yang tidak berhasil disebabkan oleh driver asli yang belum terpasang, koneksi USB tidak langsung, atau utilitas Epson lain yang sedang menggunakan printer.

  1. Instal driver asli

    Install the official Epson driver for Photo 1430 and confirm that Windows can see the printer.

  2. Hubungkan langsung melalui USB

    Connect Epson Photo 1430 to the computer without Wi-Fi, a hub or an adapter.

  3. Mulai Wic Reset Connect

    Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson Photo 1430.

  4. Masukkan kunci dan reset

    Masukkan kunci yang dibeli, pilih Reset, dan biarkan printer tetap terhubung hingga selesai.

Selesaikan dengan benar: Finish by closing Wic Reset Connect and restarting Epson Photo 1430. A short power-off interval lets the printer reload the updated counter value.
If Epson Photo 1430 is not detected
  • Hubungkan printer langsung ke komputer. Jangan gunakan Wi-Fi, hub USB, stasiun dok, atau server cetak.
  • Hapus pekerjaan cetak yang dijeda dan mulai ulang printer serta Windows jika program lain sedang menggunakan koneksi USB.
  • Tutup Epson Status Monitor dan perangkat lunak pemeliharaan Epson lainnya sebelum memulai Wic Reset Connect.
  • Jalankan Wic Reset Connect sebagai Administrator dan pastikan koneksi internet tetap aktif selama proses validasi.

Buka petunjuk lengkap

Pertanyaan umum

Epson Photo 1430 reset FAQ

Berapa lama proses reset berlangsung?

Proses reset itu sendiri biasanya selesai dalam sekitar 1–2 menit setelah printer terdeteksi dengan benar.

Bagaimana jika percobaan pengaturan ulang pertama gagal?

Perbaiki masalah driver atau komunikasi USB terlebih dahulu. Jika kunci telah digunakan, gunakan generator kunci baru atau hubungi dukungan.

Does Epson Photo 1430 need service mode?

Tidak. Printer Epson tidak menggunakan urutan mode servis Canon. Hubungkan printer secara normal melalui USB.

Reset dengan percaya diri

Restore Epson Photo 1430

Use the model-specific steps above to reset Epson Photo 1430 with a stable connection and a valid key.

Kunci reset: $8,00
Keranjang Belanja
Pilih mata uang Anda