Epson Photo 1500W Waste Ink Counter Reset

When the Epson Photo 1500W reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson Photo 1500W uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson Photo 1500W Waste Ink Counter

S Wic Reset Connect, you can reset the Epson Photo 1500W waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Uobičajeni simptomi

• Pisač odbija ispisati čak i kad je tinte dovoljno.
• Epson Status Monitor prikazuje upozorenje na održavanje
• Treptajuća svjetla i blokirani poslovi
• Uređaj je zaključan dok se ne izvrši resetiranje.

Reset Epson Photo 1500W Waste Ink Counter in 3 Steps

1. Korak 1: Use a Windows PC (7–11) with Internet access. Connect Epson Photo 1500W via USB (Wi-Fi reset is not supported).
2. Korak 2: Počni Wic Reset Connect in Administrator mode and wait until Epson Photo 1500W appears in the device list.
3. Korak 3: Use the key to reset the counter, wait for completion, then restart Epson Photo 1500W to finalize.

Most Epson Photo 1500W waste counter resets finish in ~1–2 minutes.

Što vam je potrebno

• Windows 7/8/10/11 PC
• Valjani Wic resetni ključ za povezivanje
• Stabilna internetska veza tijekom resetiranja
• Potrebna je USB veza (ne podržava se resetiranje putem Wi-Fi-ja)

Otklanjanje poteškoća

• Pokrenite aplikaciju kao administrator.
• Zatvorite Epson Status Monitor ili druge uslužne programe za pisač.
• Isprobajte drugi USB kabel (neki kabeli služe samo za punjenje).
• Koristite izravno USB-povezivanje (izbjegavajte USB-hubove).
• Ponovno pokrenite pisač i računalo, zatim pokušajte ponovno.