Epson ET-2711 Waste Ink Counter Reset

If your Epson ET-2711 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson ET-2711 uses a software counter to estimate pad saturation and locks printing at a set threshold.

What Causes the Epson ET-2711 Ink Pad Counter Warning?

Koos Wic Reset Connect, you can reset the Epson ET-2711 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Tavalised sümptomid

• ‘Service Required’ / service life sõnum draiveris või kommunaalprogrammis
• Hooldus-/tugikood (varieerub mudelite/ajurite kaupa)
• Pärast puhastustsükleid peatub printimine
• Hoiatus kordub pärast printeri taaskäivitamist

Step-by-Step: Epson ET-2711 Waste Counter Reset

1. 1. samm: Prepare a Windows PC + USB cable and connect Epson ET-2711 directly. Keep Internet enabled for validation.
2. 2. samm: Käivita Wic Reset Connect as Administrator and confirm Epson ET-2711 is detected.
3. 3. samm: Use the key to reset the counter, wait for completion, then restart Epson ET-2711 to finalize.

Most Epson ET-2711 waste counter resets finish in ~1–2 minutes.

Kui printerit ei tuvastata

• Käivitage rakendus administraatorina.
• Käivitage printer ja arvuti uuesti, seejärel proovige uuesti.
• Sulgege Epson Status Monitor või muud printeri utiliidid.
• Kasutage otsest USB-ühendust (vältige keskusi).
• Proovige teist USB-kaablit (mõned kaablid on ainult laadimiseks).

Korduma kippuvad küsimused