Epson ET-2711 Waste Ink Counter Reset

If your Epson ET-2711 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson ET-2711 uses a software counter to estimate pad saturation and locks printing at a set threshold.

What Causes the Epson ET-2711 Ink Pad Counter Warning?

S spletno stranjo Wic Reset Connect, you can reset the Epson ET-2711 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Pogosti simptomi

• ‘Sporočilo ’Service Required" / življenjska doba v gonilniku ali pripomočku
• Koda za vzdrževanje/podporo (razlikuje se glede na model/voznik)
• Tiskanje se ustavi po ciklih čiščenja
• Opozorilo se ponovi po ponovnem zagonu tiskalnika

Step-by-Step: Epson ET-2711 Waste Counter Reset

1. 1. korak: Prepare a Windows PC + USB cable and connect Epson ET-2711 directly. Keep Internet enabled for validation.
2. 2. korak: Spustite Wic Reset Connect as Administrator and confirm Epson ET-2711 is detected.
3. 3. korak: Use the key to reset the counter, wait for completion, then restart Epson ET-2711 to finalize.

Most Epson ET-2711 waste counter resets finish in ~1–2 minutes.

Če tiskalnik ni zaznan

• Aplikacijo zaženite kot skrbnik.
• Ponovno zaženite tiskalnik in računalnik ter poskusite znova.
• Zaprite Epson Status Monitor ali druge pripomočke za tiskalnik.
• Uporabite neposredno povezavo USB (izogibajte se vozliščem).
• Poskusite z drugim kablom USB (nekateri kabli so namenjeni samo polnjenju).

Pogosto zastavljena vprašanja