Epson ET-2711 Waste Ink Counter Reset

If your Epson ET-2711 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson ET-2711 uses a software counter to estimate pad saturation and locks printing at a set threshold.

What Causes the Epson ET-2711 Ink Pad Counter Warning?

S Wic Reset Connect, you can reset the Epson ET-2711 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Uobičajeni simptomi

• ‘Potreban servis’ / poruka o vijeku trajanja u upravljačkom programu ili korisničkom sučelju
• Kôd za održavanje/podršku (razlikuje se ovisno o modelu/vozaču)
• Tiskanje se zaustavlja nakon ciklusa čišćenja
• Upozorenje se ponavlja nakon ponovnog pokretanja pisača

Step-by-Step: Epson ET-2711 Waste Counter Reset

1. Korak 1: Prepare a Windows PC + USB cable and connect Epson ET-2711 directly. Keep Internet enabled for validation.
2. Korak 2: Trči Wic Reset Connect as Administrator and confirm Epson ET-2711 is detected.
3. Korak 3: Use the key to reset the counter, wait for completion, then restart Epson ET-2711 to finalize.

Most Epson ET-2711 waste counter resets finish in ~1–2 minutes.

Ako se pisač ne detektira

• Pokrenite aplikaciju kao administrator.
• Ponovno pokrenite pisač i računalo, zatim pokušajte ponovno.
• Zatvorite Epson Status Monitor ili druge uslužne programe za pisač.
• Koristite izravno USB-povezivanje (izbjegavajte USB-hubove).
• Isprobajte drugi USB kabel (neki kabeli služe samo za punjenje).

Često postavljana pitanja