How to Reset Epson EP-804A Waste Ink Counter

Epson EP-804A Waste Ink Counter Reset

If your Epson EP-804A suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson EP-804A uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson EP-804A Waste Ink Counter

Most Epson EP-804A waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Reset Epson EP-804A Waste Ink Counter in 3 Steps

Step 1: Use a Windows PC (7–11) with Internet access. Connect Epson EP-804A via USB (Wi-Fi reset is not supported).
Step 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson EP-804A.
Step 3: Use the key to reset the counter, wait for completion, then restart Epson EP-804A to finalize.

Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson EP-804A waste counter resets finish in ~1–2 minutes.

Before You Begin

Windows 7/8/10/11 PC
Stable Internet connection during reset
Valid Wic Reset Connect reset key
USB connection required (Wi-Fi reset not supported)

FAQ

How long does it take?

Usually about 1–2 minutes.

Can I reset over Wi-Fi?

No. The reset requires a USB connection to a Windows PC.

Do I need a service center?

Typically not for a waste ink counter lock; a reset is usually sufficient.

What if reset doesn’t work?

Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson EP-804A – Waste Ink Counter Reset using Wic Reset Connect.