Epson EP-803AW Waste Ink Counter Reset

The Epson EP-803AW is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

A waste ink counter in the Epson EP-803AW accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Understanding the Epson EP-803AW Waste Ink Counter

With Wic Reset Connect, you can reset the Epson EP-803AW waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Three Steps to Restore Epson EP-803AW Printing

Step 1: Prepare a Windows PC + USB cable and connect Epson EP-803AW directly. Keep Internet enabled for validation.
Step 2: Run Wic Reset Connect as Administrator and confirm Epson EP-803AW is detected.
Step 3: Paste the reset key, click Reset, and after completion power-cycle Epson EP-803AW.

Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson EP-803AW waste counter resets finish in ~1–2 minutes.

System Requirements

USB connection required (Wi-Fi reset not supported)
Valid Wic Reset Connect reset key
Windows 7/8/10/11 PC
Stable Internet connection during reset

If the Printer Is Not Detected

Close Epson Status Monitor or other printer utilities.
Run the app as Administrator.
Use a direct USB connection (avoid hubs).
Restart printer and PC, then try again.
Try another USB cable (some cables are charge-only).

FAQ

How long does it take?

Usually about 1–2 minutes.

Can I reset over Wi-Fi?

No. The reset requires a USB connection to a Windows PC.

Do I need a service center?

Typically not for a waste ink counter lock; a reset is usually sufficient.

What if reset doesn’t work?

Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson EP-803AW – Waste Ink Counter Reset using Wic Reset Connect.