Epson EP-804A Waste Ink Counter Reset
If your Epson EP-804A suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.
During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson EP-804A uses a software counter to estimate pad saturation and locks printing at a set threshold.
Understanding the Epson EP-804A Waste Ink Counter
Most Epson EP-804A waste ink counter locks are solved by a software counter reset. Wic Reset Connect omogoča enostaven postopek.
Reset Epson EP-804A Waste Ink Counter in 3 Steps
- 1. korak: Use a Windows PC (7–11) with Internet access. Connect Epson EP-804A via USB (Wi-Fi reset is not supported).
- 2. korak: Odpri Wic Reset Connect with admin privileges and verify device recognition for Epson EP-804A.
- 3. korak: Use the key to reset the counter, wait for completion, then restart Epson EP-804A to finalize.
Most Epson EP-804A waste counter resets finish in ~1–2 minutes.
Preden začnete
- Windows 7/8/10/11 PC
- Stabilna internetna povezava med ponastavitvijo
- Veljavna ponastavitev Wic Povežite tipko za ponastavitev
- Zahtevana je povezava USB (ponastavitev Wi-Fi ni podprta)
POGOSTA VPRAŠANJA
Koliko časa traja?
Običajno približno 1-2 minuti.
Ali lahko ponastavitev izvedem prek omrežja Wi-Fi?
Ne. Ponastavitev zahteva povezavo USB z računalnikom Windows.
Ali potrebujem servisni center?
Običajno ne za zaklep števca za odpadno črnilo; ponavadi zadostuje ponastavitev.
Kaj če ponastavitev ne deluje?
Preverite kabel/port USB, zaženite ga kot upravitelj in zaprite druge pripomočke za tiskalnik.
Guide prepared for Epson EP-804A – Waste Ink Counter Reset using Wic Reset Connect.