دليل إعادة الضبط الخاص بالطراز

Epson XP-2101 Reset Waste Ink Counter

If your Epson XP-2101 has stopped with an ink pad or service-life warning, the printer may have reached its waste ink counter limit. This model-specific guide explains what the message means and how to complete the reset with Wic Reset Connect.

مفتاح إعادة الضبط$8,00
التسليم الفوري عبر البريد الإلكترونييشمل الدعم الفني ما يلي:مفتاح بديل بعد فشل إعادة الضبط
المشكلة

Why Epson XP-2101 stops printing

During head cleaning and normal maintenance, unused ink is directed into internal absorber pads. Epson XP-2101 estimates that accumulation with a software counter; it does not directly measure the physical amount of ink in the pads.

صُمم Wic Reset Connect لإعادة ضبط العداد المتوافق في Epson XP-2101. يجب مع ذلك فحص نظام الحبر المهدور الفعلي وصيانته عند الضرورة.

Windows 7–11كمبيوتر شخصي أو محمول
USB مباشربدون Wi-Fi أو موزّع
الإنترنتللتحقق من المفتاح
مفتاح إعادة الضبطلهذه العملية
خطوة بخطوة

Reset the counter in Epson XP-2101

ابدأ بعمليات التحقق من الاتصال أدناه، ثم نفّذ إعادة الضبط من دون فتح برامج طابعة أخرى أثناء العملية.

  1. ثبّت برنامج التشغيل الأصلي

    Install the official Epson driver for XP-2101 and confirm that Windows can see the printer.

  2. الاتصال مباشرةً عبر USB

    Connect Epson XP-2101 to the computer without Wi-Fi, a hub or an adapter.

  3. ابدأ تشغيل Wic Reset Connect

    Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson XP-2101.

  4. أدخل المفتاح وأعد ضبط العداد

    أدخل المفتاح الذي تم شراؤه، واختر Reset، وأبقِ الطابعة متصلة حتى اكتمال العملية.

أكمل بشكل صحيح: A successful reset is finalized by switching Epson XP-2101 off and on. The printer should then accept jobs normally.
If Epson XP-2101 is not detected
  • Install the original Epson driver for XP-2101; a generic Windows driver may not expose the required communication interface.
  • امسح مهام الطباعة المتوقفة مؤقتًا وأعد تشغيل الطابعة وWindows إذا كان برنامج آخر يحتفظ باتصال USB.
  • جرّب منفذ USB آخر وكابل USB معروفًا بقدرته على نقل البيانات إذا لم يتم اكتشاف الطابعة.
  • شغّل Wic Reset Connect كمسؤول وحافظ على اتصال الإنترنت نشطًا طوال عملية التحقق.

فتح التعليمات الكاملة

الأسئلة الشائعة

Epson XP-2101 reset FAQ

Does Epson XP-2101 need service mode?

لا. لا تستخدم طابعات Epson تسلسل وضع الخدمة Canon. صِل الطابعة بشكل طبيعي عبر USB.

Can I reset Epson XP-2101 over Wi-Fi?

لا. يتطلب Wic Reset Connect اتصال USB مباشرًا بالكمبيوتر الذي يعمل بنظام Windows.

كم تستغرق إعادة الضبط؟

تكتمل إعادة الضبط نفسها عادةً خلال نحو 1–2 دقيقة بعد اكتشاف الطابعة بشكل صحيح.

أعد الضبط بثقة

Restore Epson XP-2101

Use the model-specific steps above to reset Epson XP-2101 with a stable connection and a valid key.

مفتاح إعادة الضبط: $8,00
Shopping Cart
اختر عملتك