Panduan reset khusus model

Epson XP-2101 Reset Waste Ink Counter

If your Epson XP-2101 has stopped with an ink pad or service-life warning, the printer may have reached its waste ink counter limit. This model-specific guide explains what the message means and how to complete the reset with Wic Reset Connect.

Kunci reset$8,00
Pengiriman email instanTermasuk dukungan teknisKunci pengganti setelah reset gagal
Masalahnya

Why Epson XP-2101 stops printing

During head cleaning and normal maintenance, unused ink is directed into internal absorber pads. Epson XP-2101 estimates that accumulation with a software counter; it does not directly measure the physical amount of ink in the pads.

Wic Reset Connect dirancang untuk mereset penghitung yang kompatibel pada Epson XP-2101. Sistem tinta buangan fisik tetap harus diperiksa dan dirawat bila diperlukan.

Windows 7–11PC atau laptop
USB langsungTanpa Wi-Fi atau hub
InternetUntuk validasi kunci
Kunci resetUntuk operasi ini
Langkah demi langkah

Reset the counter in Epson XP-2101

Mulailah dengan pemeriksaan koneksi di bawah ini, lalu jalankan reset tanpa membuka program printer lain selama proses berlangsung.

  1. Instal driver asli

    Install the official Epson driver for XP-2101 and confirm that Windows can see the printer.

  2. Hubungkan langsung melalui USB

    Connect Epson XP-2101 to the computer without Wi-Fi, a hub or an adapter.

  3. Mulai Wic Reset Connect

    Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson XP-2101.

  4. Masukkan kunci dan reset

    Masukkan kunci yang dibeli, pilih Reset, dan biarkan printer tetap terhubung hingga selesai.

Selesaikan dengan benar: A successful reset is finalized by switching Epson XP-2101 off and on. The printer should then accept jobs normally.
If Epson XP-2101 is not detected
  • Install the original Epson driver for XP-2101; a generic Windows driver may not expose the required communication interface.
  • Hapus pekerjaan cetak yang dijeda dan mulai ulang printer serta Windows jika program lain sedang menggunakan koneksi USB.
  • Coba port USB lain dan kabel USB yang diketahui mendukung transfer data jika printer tidak terdeteksi.
  • Jalankan Wic Reset Connect sebagai Administrator dan pastikan koneksi internet tetap aktif selama proses validasi.

Buka petunjuk lengkap

Pertanyaan umum

Epson XP-2101 reset FAQ

Does Epson XP-2101 need service mode?

Tidak. Printer Epson tidak menggunakan urutan mode servis Canon. Hubungkan printer secara normal melalui USB.

Can I reset Epson XP-2101 over Wi-Fi?

Tidak. Wic Reset Connect memerlukan koneksi USB langsung ke komputer Windows.

Berapa lama proses reset berlangsung?

Proses reset itu sendiri biasanya selesai dalam sekitar 1–2 menit setelah printer terdeteksi dengan benar.

Reset dengan percaya diri

Restore Epson XP-2101

Use the model-specific steps above to reset Epson XP-2101 with a stable connection and a valid key.

Kunci reset: $8,00
Keranjang Belanja
Pilih mata uang Anda