Epson WorkForce 635 Waste Ink Counter Reset

When the Epson WorkForce 635 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

The Epson WorkForce 635 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

What Causes the Epson WorkForce 635 Ink Pad Counter Warning?

Most Epson WorkForce 635 waste ink counter locks are solved by a software counter reset. Wic Reset Connect 提供了一个简单明了的程序。.

错误如何出现

• 打印机即使有墨水也拒绝打印
• 爱普生状态监视器显示维护警告
• 闪烁的灯光和受阻的工作
• 设备被锁定，直到执行重置

Step-by-Step: Epson WorkForce 635 Waste Counter Reset

1. 步骤 1： Connect Epson WorkForce 635 to a Windows computer with a stable Internet connection using a USB cable.
2. 步骤 2： 开始 Wic Reset Connect in Administrator mode and wait until Epson WorkForce 635 appears in the device list.
3. 步骤 3： 粘贴重置密钥，点击 重置, and after completion power-cycle Epson WorkForce 635.

Most Epson WorkForce 635 waste counter resets finish in ~1–2 minutes.

开始之前

• 有效 Wic 复位连接复位键
• Windows 7/8/10/11 电脑
• 需要 USB 连接（不支持 Wi-Fi 重置）
• 重置期间稳定的互联网连接

如果检测不到打印机

• 如果验证失败，则暂时禁用 VPN/代理。.
• 使用直接 USB 连接（避免使用集线器）。.
• 关闭 Epson 状态监视器或其他打印机实用程序。.
• 试试另一条 USB 电缆（有些电缆只能充电）。.
• 重新启动打印机和电脑，然后再试一次。.