Epson WorkForce 635 Waste Ink Counter Reset
When the Epson WorkForce 635 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.
The Epson WorkForce 635 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.
What Causes the Epson WorkForce 635 Ink Pad Counter Warning?
Most Epson WorkForce 635 waste ink counter locks are solved by a software counter reset. Wic Reset Connect menyediakan prosedur yang mudah.
Bagaimana Kesalahan Muncul
- Printer menolak untuk mencetak meskipun tinta tersedia
- Monitor Status Epson menunjukkan peringatan pemeliharaan
- Lampu berkedip dan pekerjaan terhalang
- Perangkat terkunci hingga pengaturan ulang dilakukan
Step-by-Step: Epson WorkForce 635 Waste Counter Reset
- Langkah 1: Connect Epson WorkForce 635 to a Windows computer with a stable Internet connection using a USB cable.
- Langkah 2: Mulai Wic Reset Connect in Administrator mode and wait until Epson WorkForce 635 appears in the device list.
- Langkah 3: Rekatkan tombol atur ulang, klik Atur ulang, and after completion power-cycle Epson WorkForce 635.
Most Epson WorkForce 635 waste counter resets finish in ~1–2 minutes.
Sebelum Anda Mulai
- Tombol reset Wic Reset yang valid Hubungkan tombol reset
- Windows 7/8/10/11 PC
- Diperlukan koneksi USB (pengaturan ulang Wi-Fi tidak didukung)
- Koneksi Internet stabil selama pengaturan ulang
Jika Printer Tidak Terdeteksi
- Nonaktifkan VPN/proxy untuk sementara waktu jika validasi gagal.
- Gunakan koneksi USB langsung (hindari hub).
- Tutup Epson Status Monitor atau utilitas printer lainnya.
- Coba kabel USB yang lain (beberapa kabel hanya untuk mengisi daya).
- Hidupkan ulang printer dan PC, kemudian coba lagi.
Guide prepared for Epson WorkForce 635 – Waste Ink Counter Reset using Wic Reset Connect.