Epson ME-940FW Waste Ink Counter Reset

The Epson ME-940FW delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson ME-940FW uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson ME-940FW Show ‘Service Required’?

与 Wic Reset Connect, you can reset the Epson ME-940FW waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

错误如何出现

• 打印机即使有墨水也拒绝打印
• 爱普生状态监视器显示维护警告
• 闪烁的灯光和受阻的工作
• 设备被锁定，直到执行重置

Epson ME-940FW Ink Pad Counter Reset – Quick Steps

1. 步骤 1： Prepare a Windows PC + USB cable and connect Epson ME-940FW directly. Keep Internet enabled for validation.
2. 步骤 2： 运行 Wic Reset Connect as Administrator and confirm Epson ME-940FW is detected.
3. 步骤 3： 粘贴重置密钥，点击 重置, and after completion power-cycle Epson ME-940FW.

Most Epson ME-940FW waste counter resets finish in ~1–2 minutes.

系统要求

• 重置期间稳定的互联网连接
• 有效 Wic 复位连接复位键
• Windows 7/8/10/11 电脑
• 需要 USB 连接（不支持 Wi-Fi 重置）

常见修复

• 重新启动打印机和电脑，然后再试一次。.
• 使用直接 USB 连接（避免使用集线器）。.
• 以管理员身份运行应用程序。.
• 关闭 Epson 状态监视器或其他打印机实用程序。.
• 试试另一条 USB 电缆（有些电缆只能充电）。.