Epson ME-940FW Waste Ink Counter Reset

The Epson ME-940FW delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson ME-940FW uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson ME-940FW Show ‘Service Required’?

Dengan Wic Reset Connect, you can reset the Epson ME-940FW waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Bagaimana Kesalahan Muncul

• Printer menolak untuk mencetak meskipun tinta tersedia
• Monitor Status Epson menunjukkan peringatan pemeliharaan
• Lampu berkedip dan pekerjaan terhalang
• Perangkat terkunci hingga pengaturan ulang dilakukan

Epson ME-940FW Ink Pad Counter Reset – Quick Steps

1. Langkah 1: Prepare a Windows PC + USB cable and connect Epson ME-940FW directly. Keep Internet enabled for validation.
2. Langkah 2: Jalankan Wic Reset Connect as Administrator and confirm Epson ME-940FW is detected.
3. Langkah 3: Rekatkan tombol atur ulang, klik Atur ulang, and after completion power-cycle Epson ME-940FW.

Most Epson ME-940FW waste counter resets finish in ~1–2 minutes.

Persyaratan Sistem

• Koneksi Internet stabil selama pengaturan ulang
• Tombol reset Wic Reset yang valid Hubungkan tombol reset
• Windows 7/8/10/11 PC
• Diperlukan koneksi USB (pengaturan ulang Wi-Fi tidak didukung)

Perbaikan Umum

• Hidupkan ulang printer dan PC, kemudian coba lagi.
• Gunakan koneksi USB langsung (hindari hub).
• Jalankan aplikasi sebagai Administrator.
• Tutup Epson Status Monitor atau utilitas printer lainnya.
• Coba kabel USB yang lain (beberapa kabel hanya untuk mengisi daya).