Epson ME-940FW Waste Ink Counter Reset

The Epson ME-940FW delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson ME-940FW uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson ME-940FW Show ‘Service Required’?

S Wic Reset Connect, you can reset the Epson ME-940FW waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Kako se pogreška prikazuje

• Pisač odbija ispisati čak i kad je tinte dovoljno.
• Epson Status Monitor prikazuje upozorenje na održavanje
• Treptajuća svjetla i blokirani poslovi
• Uređaj je zaključan dok se ne izvrši resetiranje.

Epson ME-940FW Ink Pad Counter Reset – Quick Steps

1. Korak 1: Prepare a Windows PC + USB cable and connect Epson ME-940FW directly. Keep Internet enabled for validation.
2. Korak 2: Trči Wic Reset Connect as Administrator and confirm Epson ME-940FW is detected.
3. Korak 3: Umetnite reset-ključ i kliknite Ponovno pokretanje, and after completion power-cycle Epson ME-940FW.

Most Epson ME-940FW waste counter resets finish in ~1–2 minutes.

Sistemski zahtjevi

• Stabilna internetska veza tijekom resetiranja
• Valjani Wic resetni ključ za povezivanje
• Windows 7/8/10/11 PC
• Potrebna je USB veza (ne podržava se resetiranje putem Wi-Fi-ja)

Uobičajena rješenja

• Ponovno pokrenite pisač i računalo, zatim pokušajte ponovno.
• Koristite izravno USB-povezivanje (izbjegavajte USB-hubove).
• Pokrenite aplikaciju kao administrator.
• Zatvorite Epson Status Monitor ili druge uslužne programe za pisač.
• Isprobajte drugi USB kabel (neki kabeli služe samo za punjenje).