Epson ME-940FW Waste Ink Counter Reset

The Epson ME-940FW delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson ME-940FW uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson ME-940FW Show ‘Service Required’?

Med Wic Reset Connect, you can reset the Epson ME-940FW waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Hvordan fejlen opstår

• Printeren nægter at udskrive, selv om der er blæk til rådighed
• Epson Status Monitor viser advarsel om vedligeholdelse
• Blinkende lys og blokerede jobs
• Enheden er låst, indtil nulstilling er udført

Epson ME-940FW Ink Pad Counter Reset – Quick Steps

1. Trin 1: Prepare a Windows PC + USB cable and connect Epson ME-940FW directly. Keep Internet enabled for validation.
2. Trin 2: Løb Wic Reset Connect as Administrator and confirm Epson ME-940FW is detected.
3. Trin 3: Indsæt nulstillingsnøglen, klik på Nulstil, and after completion power-cycle Epson ME-940FW.

Most Epson ME-940FW waste counter resets finish in ~1–2 minutes.

Systemkrav

• Stabil internetforbindelse under nulstilling
• Gyldig Wic-nulstilling Tilslut nulstillingsnøgle
• Windows 7/8/10/11 PC
• USB-forbindelse påkrævet (Wi-Fi-nulstilling understøttes ikke)

Almindelige rettelser

• Genstart printeren og pc'en, og prøv igen.
• Brug en direkte USB-forbindelse (undgå hubs).
• Kør appen som administrator.
• Luk Epson Status Monitor eller andre printerværktøjer.
• Prøv et andet USB-kabel (nogle kabler er kun til opladning).