特定型号重置指南
爱普生 TX117 重置废墨计数器
If your Epson TX117 has stopped with an ink pad or service-life warning, the printer may have reached its waste ink counter limit. This model-specific guide explains what the message means and how to complete the reset with Wic Reset Connect.
Understanding the Epson TX117 waste ink warning
The printer protects against possible ink overflow by monitoring an internal service counter. On Epson TX117, reaching the threshold can trigger an ink pad warning and block further jobs.
Wic Reset Connect 旨在重置兼容的计数器 Epson TX117. 。必要时仍应检查并维护实体废墨系统。.
Reset the counter in Epson TX117
重置通常只需几分钟，但在使用密钥之前，必须正确检测到打印机。.
-
安装原始驱动程序
Install the official Epson driver for TX117 and confirm that Windows can see the printer.
-
通过 USB 直接连接
Connect Epson TX117 to the computer without Wi-Fi, a hub or an adapter.
-
启动 Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson TX117.
-
输入密钥并重置
输入已购买的密钥，选择“重置”，并保持打印机连接状态，直到操作完成。.
If Epson TX117 is not detected
- 开始前，请关闭 Epson 状态监视器以及任何其他 Epson 维护软件，以便进行 Wic Reset Connect。.
- 以管理员身份运行 Wic Reset Connect，并在整个验证过程中保持互联网连接处于活动状态。.
- 清除暂停的打印任务；如果其他程序占用了 USB 连接，请同时重新启动打印机和 Windows。.
- Install the original Epson driver for TX117; a generic Windows driver may not expose the required communication interface.
Epson TX117 reset FAQ
重置需要多长时间？
打印机被正确检测到后，重置本身通常会在约 1–2 分钟内完成。.
Does Epson TX117 need service mode?
不需要。Epson 打印机不使用 Canon 服务模式操作顺序。通过 USB 正常连接打印机即可。.
重置会清洁或更换墨垫吗？
不会。它会更改存储的计数器值。当实体废墨系统的状况需要时，请对其进行检查、清洁或更换。.