Epson R2400 Waste Ink Counter Reset
If your Epson R2400 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.
The Epson R2400 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.
Why Does the Epson R2400 Show ‘Service Required’?
Most Epson R2400 waste ink counter locks are solved by a software counter reset. Wic Reset Connect cung cấp một quy trình đơn giản.
Các triệu chứng thường gặp
- Máy in từ chối in ngay cả khi còn mực.
- Epson Status Monitor hiển thị cảnh báo bảo trì.
- Đèn nhấp nháy và công việc bị chặn
- Thiết bị sẽ bị khóa cho đến khi thực hiện thao tác đặt lại.
Step-by-Step: Epson R2400 Waste Counter Reset
- Bước 1: Use a Windows PC (7–11) with Internet access. Connect Epson R2400 via USB (Wi-Fi reset is not supported).
- Bước 2: Chạy Wic Reset Connect as Administrator and confirm Epson R2400 is detected.
- Bước 3: Use the key to reset the counter, wait for completion, then restart Epson R2400 to finalize.
Most Epson R2400 waste counter resets finish in ~1–2 minutes.
Các giải pháp thông dụng
- Khởi động lại máy in và máy tính, sau đó thử lại.
- Tạm thời vô hiệu hóa VPN/proxy nếu quá trình xác thực thất bại.
- Đóng Epson Status Monitor hoặc các công cụ quản lý máy in khác.
- Sử dụng kết nối USB trực tiếp (tránh sử dụng hub).
- Hãy thử sử dụng một cáp USB khác (một số cáp chỉ hỗ trợ sạc).
Guide prepared for Epson R2400 – Waste Ink Counter Reset using Wic Reset Connect.