Epson R2400 Waste Ink Counter Reset
If your Epson R2400 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.
The Epson R2400 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.
Why Does the Epson R2400 Show ‘Service Required’?
Most Epson R2400 waste ink counter locks are solved by a software counter reset. Wic Reset Connect 提供了一个简单明了的程序。.
常见症状
- 打印机即使有墨水也拒绝打印
- 爱普生状态监视器显示维护警告
- 闪烁的灯光和受阻的工作
- 设备被锁定，直到执行重置
Step-by-Step: Epson R2400 Waste Counter Reset
- 步骤 1： Use a Windows PC (7–11) with Internet access. Connect Epson R2400 via USB (Wi-Fi reset is not supported).
- 步骤 2： 运行 Wic Reset Connect as Administrator and confirm Epson R2400 is detected.
- 步骤 3： Use the key to reset the counter, wait for completion, then restart Epson R2400 to finalize.
Most Epson R2400 waste counter resets finish in ~1–2 minutes.
常见修复
- 重新启动打印机和电脑，然后再试一次。.
- 如果验证失败，则暂时禁用 VPN/代理。.
- 关闭 Epson 状态监视器或其他打印机实用程序。.
- 使用直接 USB 连接（避免使用集线器）。.
- 试试另一条 USB 电缆（有些电缆只能充电）。.
Guide prepared for Epson R2400 – Waste Ink Counter Reset using Wic Reset Connect.