Epson R2400 Waste Ink Counter Reset

If your Epson R2400 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

The Epson R2400 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why Does the Epson R2400 Show ‘Service Required’?

Most Epson R2400 waste ink counter locks are solved by a software counter reset. Wic Reset Connect Pruža jednostavan postupak.

Uobičajeni simptomi

• Pisač odbija ispisati čak i kad je tinte dovoljno.
• Epson Status Monitor prikazuje upozorenje na održavanje
• Treptajuća svjetla i blokirani poslovi
• Uređaj je zaključan dok se ne izvrši resetiranje.

Step-by-Step: Epson R2400 Waste Counter Reset

1. Korak 1: Use a Windows PC (7–11) with Internet access. Connect Epson R2400 via USB (Wi-Fi reset is not supported).
2. Korak 2: Trči Wic Reset Connect as Administrator and confirm Epson R2400 is detected.
3. Korak 3: Use the key to reset the counter, wait for completion, then restart Epson R2400 to finalize.

Most Epson R2400 waste counter resets finish in ~1–2 minutes.

Uobičajena rješenja

• Ponovno pokrenite pisač i računalo, zatim pokušajte ponovno.
• Privremeno onemogućite VPN/proxy ako provjera ne uspije.
• Zatvorite Epson Status Monitor ili druge uslužne programe za pisač.
• Koristite izravno USB-povezivanje (izbjegavajte USB-hubove).
• Isprobajte drugi USB kabel (neki kabeli služe samo za punjenje).