Epson EP-704A Waste Ink Counter Reset
The Epson EP-704A is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.
The Epson EP-704A tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.
Understanding the Epson EP-704A Waste Ink Counter
Với Wic Reset Connect, you can reset the Epson EP-704A waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.
Lỗi xuất hiện như thế nào
- Máy in từ chối in ngay cả khi còn mực.
- Epson Status Monitor hiển thị cảnh báo bảo trì.
- Đèn nhấp nháy và công việc bị chặn
- Thiết bị sẽ bị khóa cho đến khi thực hiện thao tác đặt lại.
Three Steps to Restore Epson EP-704A Printing
- Bước 1: Prepare a Windows PC + USB cable and connect Epson EP-704A directly. Keep Internet enabled for validation.
- Bước 2: Chạy Wic Reset Connect as Administrator and confirm Epson EP-704A is detected.
- Bước 3: Use the key to reset the counter, wait for completion, then restart Epson EP-704A to finalize.
Most Epson EP-704A waste counter resets finish in ~1–2 minutes.
Trước khi bắt đầu
- Máy tính Windows 7/8/10/11
- Cần kết nối USB (không hỗ trợ đặt lại Wi-Fi)
- Khóa đặt lại kết nối Wic hợp lệ
- Kết nối Internet ổn định trong quá trình reset
Guide prepared for Epson EP-704A – Waste Ink Counter Reset using Wic Reset Connect.