Epson EP-704A Waste Ink Counter Reset
The Epson EP-704A is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.
The Epson EP-704A tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.
Understanding the Epson EP-704A Waste Ink Counter
Avec Wic Reset Connect, you can reset the Epson EP-704A waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.
Comment l'erreur apparaît-elle ?
- L'imprimante refuse d'imprimer même s'il y a de l'encre disponible
- Epson Status Monitor affiche un avertissement de maintenance
- Voyants clignotants et travaux bloqués
- L'appareil est verrouillé jusqu'à ce qu'une réinitialisation soit effectuée
Three Steps to Restore Epson EP-704A Printing
- Étape 1 : Prepare a Windows PC + USB cable and connect Epson EP-704A directly. Keep Internet enabled for validation.
- Étape 2 : Exécuter Wic Reset Connect as Administrator and confirm Epson EP-704A is detected.
- Étape 3 : Use the key to reset the counter, wait for completion, then restart Epson EP-704A to finalize.
Most Epson EP-704A waste counter resets finish in ~1–2 minutes.
Avant de commencer
- Windows 7/8/10/11 PC
- Connexion USB requise (la réinitialisation Wi-Fi n'est pas prise en charge)
- Réinitialisation Wic valide Connecter la clé de réinitialisation
- Connexion Internet stable pendant la réinitialisation
Guide prepared for Epson EP-704A – Waste Ink Counter Reset using Wic Reset Connect.