Epson EP-704A Waste Ink Counter Reset
The Epson EP-704A is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.
The Epson EP-704A tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.
Understanding the Epson EP-704A Waste Ink Counter
Met Wic Reset Connect, you can reset the Epson EP-704A waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.
Hoe de fout optreedt
- Printer weigert af te drukken, zelfs met beschikbare inkt
- Epson Status Monitor toont onderhoudswaarschuwing
- Knipperende lampjes en geblokkeerde banen
- Apparaat is vergrendeld totdat reset wordt uitgevoerd
Three Steps to Restore Epson EP-704A Printing
- Stap 1: Prepare a Windows PC + USB cable and connect Epson EP-704A directly. Keep Internet enabled for validation.
- Stap 2: Ren Wic Reset Connect as Administrator and confirm Epson EP-704A is detected.
- Stap 3: Use the key to reset the counter, wait for completion, then restart Epson EP-704A to finalize.
Most Epson EP-704A waste counter resets finish in ~1–2 minutes.
Voordat u begint
- Windows 7/8/10/11 PC
- USB-verbinding vereist (Wi-Fi-reset niet ondersteund)
- Geldige Wic Reset Verbind Resetsleutel
- Stabiele internetverbinding tijdens het resetten
Guide prepared for Epson EP-704A – Waste Ink Counter Reset using Wic Reset Connect.