Model-specific reset guide
Epson RX640 Obnovenie počítadla použitého atramentu
Epson RX640 may refuse new print jobs after estimating that the waste ink pads have reached their service limit. Wic Reset Connect can reset the software counter after the printer is prepared correctly.
What the Epson RX640 service message means
The printer protects against possible ink overflow by monitoring an internal service counter. On Epson RX640, reaching the threshold can trigger an ink pad warning and block further jobs.
Wic Reset Connect is designed to reset the compatible counter in Epson RX640. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson RX640
Correct preparation protects the reset key from being used during a failed communication attempt. Verify each requirement before selecting Reset.
-
Install the original driver
Install the official Epson driver for RX640 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson RX640 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson RX640.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson RX640 is not detected
- Install the original Epson driver for RX640; a generic Windows driver may not expose the required communication interface.
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
- Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.
Epson RX640 reset FAQ
Does Epson RX640 need service mode?
No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.
Does the reset clean or replace the ink pads?
No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.
Can I reset Epson RX640 over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
Restore Epson RX640
A direct USB connection, the correct driver and a valid key are all you need to reset Epson RX640.